Nyheter

Modulene som boenheter er dedikert til innkvartering av "Viktige tjenester" i henhold til DNVGL-ST-E272.

Overnattingsmodulene samsvarer med DNVGL-ST-E272 – 2.7-2 Offshore Service Modules, februar 2016 og DNV-ST-E273 – 2.7-3 bærbare offshoreenheter, mai 2022.

Innkvarteringsmoduler godkjent for løfteoperasjonen i henhold til DNV-ST-E273, disse enhetene er godkjent som Type D enheter med driftsklasse R00-SE (MGW 35t og 45t) for løft i havn.

Gjennomsnittlig hytteareal er 8 m2 med en høyde på 2,1 m. Hver av dem er utstyrt med et separat bad med behagelig gulvvarme (temperaturkontrollert), inkludert et vakuumtoalett, servant, dusj og speil. Hver hytte har en egen 30-liters varmtvannsbereder plassert i inspeksjonsrommet rett bak, samt tilkobling til utløpsventilasjon.

Bilde 1 – eksempel på standard sanitærmodul

Hyttene inkluderer interiørutstyr som:

Dobbeltsenger (med øvre pull-man) med nedre skuffer for sengetøy

To-seters sofa

Skrivebord med stol

To enkeltdørs garderober

Åpningsbare vinduer med stormsikring.

In order to provide users with thermal comfort, the cabins are also equipped with a heated floor (with temperature control), a dedicated air conditioner and a supply ventilation system with the ability to regulate the temperature within 18-28 degrees. Exactly the same adjustment option in the summer is provided by the LG Standard 2 air conditioner with a power of 9000BTU.

The floor in the module is of the floating type and the entire room is finished with a vinyl floor covering. The walls and ceilings are made of panels with a pleasant, light finish. In the cabins, there are reading lamps and sockets for phone chargers next to the beds. Above the desk top there are further double European standard electrical sockets. LED lighting was installed both in the cabins and in the corridor. Additionally, two electric heaters with a power of 800 W each were installed in the corridor.

Each module has its own sanitary sewage disposal station based on a proven vacuum set based on the JETS 15MB VCS pump with a 150-ltr vacuum accumulation tank. The pump set with the tank was placed in a specially designated technical room, which also houses the main electrical switchboard, a supply fan with a heater, an exhaust fan for toilets, control elements for the comfort ventilation system and security system devices.

The modules have external connection sockets with a load capacity of 125A and require an electrical supply of 3x230V/60hz. Sanitary water should be supplied through a 1" threaded connection, and sewage is pumped outside through flange-type reinforcement in size PN16/DN40. All water installations have shut-off valves enabling trouble-free disconnection of the module and transport to a new location.

The accommodation modules have ready to connect to ship’s systems : PA/GA speakers , two ways communication device and heat/smoke detectors as well as portable fire extinguishers.

The structure of the modules includes container sockets in the corners, which allow for easy mounting on board of the vessels.

The weight of the finished, equipped module is around 45 T for the 6-cabin version and 38T for the 4-cabin version. The modules are equipped with special transport eyes for lifting operations.